Sunday, May 30, 2010

101c


Check out the radiused end and the nice fit on the pinch bolt!



Here is the finished piece. I still have to make the actual bolts and silver solder the starting disc onto the pedal shaft, but for the most part it is finished!

1 comment:

  1. nice work on those cranks. My pedals don't use a pinch bolt, but a cotter pin (tapered) like bicycles have. It pulls tight on the taper to hold the crank arm onto the axle tight. If you use new pins, be careful. Many of the modern ones are made in China from some metal that looks like steel but is as strong as butter...

    ReplyDelete